Bestguarder Trail Camera Tips: Getting Better Wildlife Pictures When Hunting
Trail camera technology has gotten better and better over the years. But no matter how many megapixels a camera has, it’s useless unless you know how to get the most out of it. If you’re running the best new game cameras, and all your getting for pictures are antler tips and elbows, the following tricks will help.
13 Pro Trail Camera Tips for Hunting
To help you get better trail camera pictures, here are 13 Pro tips for your reference, hope it could help you when hunting.
1. Hang Trail Cams High
Manuals recommend placing cameras 3 to 4 feet high, but 5 to 7 feet high is usually better. Just leave some slack in the mounting strap, then place stick crossways between the camera and the tree, tipping the lens so it shoots down on deer. You’ll get a better view of the buck’s rack, and he’ll be less likely to spook from the flash.
2. Get Bucks to Stand Still for the Camera
The best pictures are always of deer standing still at a specific spot. So make bucks pose for you by setting up a bait pile, mineral lick, mock scrape, commercial food scent, or other attractants (depending on what is legal in your area) in front of the camera. Hope these Bestguarder trail camera tips could help you, if any questions, feel free to contact us.
3. Know Your Trail-Cam Before You Set it Up
“Take the time to learn about any unique features on your trail cameras,” says Tom Rainey of Browning Trail Cameras. “Things like adjustable trigger speeds, flash ranges, and detection ranges can all help you customize your cameras to perform at their peak based on your expectations, and where you have the camera set up.”
4. Set it and Forget It
It’s easy to fall into the trap of checking your trail cams too much. This can be a problem especially in high-traffic areas like field edges. The more you walk in during or before the season, the more the deer in the area are going to avoid that spot. Check your cameras once a week at the most before the season, and two to three times a week during the rut. Hope these Bestguarder trail camera tips could help you, if any questions, feel free to contact us.
5. Don’t Spook Deer When Checking a Trail-Cam
Approach cameras in sensitive areas (such as those near a natural scrape or close to bedding cover) as you would a treestand; keep the wind in your face, walk quietly, and avoid touching vegetation. On field-edge or feeder setups, drive your vehicle or ATV as close to the camera as possible, and always check it at the same time of day. Adopting a routine will habituate deer to your presence.
6. Bring a Card Reader into the Woods
“Always have a way to check your SD cards when you are in the field,” says Rainey. “Whether it’s a viewing screen on your trail camera, a card reader, or a tablet viewer, it never hurts to double-check what will be in the frame when your camera triggers. Checking SD cards in the field allows you to see where the camera is aimed and make necessary adjustments while you are there. This can help you avoid those irritating pictures that are focused too high or too low.”
7. Keep Your Scent Off of Your Camera
Just because you’re not sitting in a tree stand stinking up the woods doesn’t mean the stuff you leave there won’t smell. Wear rubber gloves and boots when placing or checking cameras. Try to handle them sparingly, and clean your cameras with scent-free cleaner before putting them in the field. Hope these Bestguarder trail camera tips could help you, if any questions, feel free to contact us.
8. Use Better Batteries
Use high-quality lithium batteries. They cost more than alkalines but last much longer in trail cams. For even longer-lasting juice, go to auxiliary power; some newer cameras come with an external battery port for use with a 6-volt battery, and you can jury-rig (at your own risk) older models to do the same.
9. Use High-Quality Cards
Not all memory cards are created equal. Even though they all look the same and will fit in your camera, some SD cards are better than others. High-quality cards will write faster and won’t fail to save an image as much. Get the best cards you can afford, and you’ll probably be able to use them season after season with better results. Hope these Bestguarder trail camera tips could help you, if any questions, feel free to contact us.
10. Point a Camera North for Better Results
The best times for deer activity are at dusk and dawn—when the sun is low and apt to shine right into a camera lens. Point your camera north if you can. Cameras facing east or west will often produce washed-out images and experience more false triggers.
11. Turn the Sensitivity Down Over Bait Piles
When you’ve got a big pile of corn out or a mineral lick, the deer can come in droves. This will wear down the battery life on your camera if the sensitivity and picture frequency is set too high. Turn these settings down to get more pictures of different deer—not a lot of pictures of the same five do. The opposite is true when placing a camera on a run, creek crossing, or over a scrape.
12. Use Mounts or T-Posts When Straight Trees Aren’t Around
When you can’t find a good tree to hang your camera, you’re going to need some options. Luckily, most trail cameras come with a ¼-20 threaded socket in the bottom for mounting on tripods or other camera mounts. Pick up some mounts that allow you to pivot the camera up or down. This will allow you to attach it to bent trees or branches. If you’re hunting on private land and there are no trees, drive a T-post or a stake-type camera mount into the ground next to some brush and attach your camera to it. Hope these Bestguarder trail camera tips could help you, if any questions, feel free to contact us.
13. Organize Your Pictures
Create a system of folders and file names for storing photos uploaded to your computer. I have separate folders for each property I hunt. Then I rename pics using a short nickname of the buck(s) shown, an abbreviation of the site, and the date. If you use the tips above, you’ll soon have so many photos of bucks that you’ll have no choice but to get organized—a good problem to have.
Our Recommendation in 2021 – Bestguarder DTC-999V
Bestguarder DTC-999V is the only device that is offering 30MP super clear at this price, and the trail camera is completely able to capture the perfectly balanced and the focused view. And with this device you will never miss a single detail of the view, even you will never miss a single view.
With the 30MP camera, this trail camera can capture everything in decent quality. And guys, not only images even the Bestguarder 30MP Trail Camera can record the Full HD videos at the 1920P resolution, so you can imagine the quality of the videos and images.
Besides the excellent camera performance, now I would like to talk about the one more amazing feature or technology of this device. This best trail camera 2021 comes with the IP68 Weather-Proof Rating, so you don’t need to be the worry about any weather condition, and without any tension, you can use it during rainy days or bad weather conditions.
And, with such a fast 0.2S Trigger Speed, the device is completely able to capture every sudden animal activity so quickly and perfectly. So everything will be captured in decent quality, and you will have the proper memory of your camping and scouting.
So, for all those who worry about the looks and design of this device, I would like to say one thing that, you can go for this device without any problem because it looks really premium and impressive and with the first view on it, it will impress you very easily.
Hope these tips could help you in your next hunting season, if any questions, feel free to contact us. Happy hunting!
Bestguarder is one of the biggest manufacturers of high-quality hunting & night vision devices and accessories in China, we are committed to providing customers with high-quality products while providing the highest level of service. If any questions or any large order requests, feel free to contact us. Many thanks for shopping with us! wild